Liebert UPS Systems PSI XR - Manual (Page 8)

Introduction
4
1.0 I
NTRODUCTION
The Liebert PSI ™ XR is a 2U, line-interactive UPS that may be installed in a rack or used as a tower
UPS.
Status indicators on the front of the Liebert PSI XR display load level, battery level, buck/boost, site-
wiring fault and battery status. Controls include a combination ON/ Alarm Silence/Manual Self-Diag-
nostic button, an Off button and a Display Status Change button.
The Liebert PSI XR has USB, DB-9 (RS232/contact closure) and SNMP interface ports. The DB-9 and
USB ports provide detailed operating information including voltages, currents, and alarm status to
the host system when used in conjunction with Liebert MultiLink ™ shutdown software.
Figure 1 Front view of UPS, rack mount
Figure 2 1000 and 1500VA—rear view
Liebert PSI XR
rack-mount configuration
Display rotates for use as tower
Liebert PSI XR
tower configuration
Display rotates for use in rack
DC 24V
OUTPUT INPUT
EPO
VOLTAGE=110V
VOLTAGE=120V
VOLTAGE=127V
2 1 FUNCTION
RJ-45 Data Line
Connectors
USB
Port
RS232 (DB-9) Port
Power Cord; 5-15P
(not shown for clarity)
EPO
External Battery
Cabinet Connector
Voltage Configuration
DIP Switch
Input Circuit Breaker
(12A for 1000VA;
15A for 1500VA)
Output Circuit Breaker
(8A for 1000VA;
15A for 1500VA)
Receptacles
NEMA 5-15R
Liebert
IntelliSlot
Port