LG RC897T - Manual (Page 30)

30
Basic Recording from a TV Basic Recording from a TV
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc is full or you stop the recording.
1.
Switch on the Recorder, select the device (DVD) for
recording and load a recordable disc. Also make
sure that the TV input is set to this recorder.
2.
Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: XP, SP, LP, EP, MLP
3.
Select the TV channel to record.
4.
Use AUDIO to select the audio channel for analog
channel or audio language for digital channel to
record.
The table below shows what will be recorded on the
different settings for different types of analog broad-
cast. The last column (Monitor Audio) shows what
you’ll hear as it is recording.
If you set the audio channel to SAP (Second Audio
Program), but there is no SAP channel being broad-
cast, the main audio (mono or stereo) will be
recorded.
5.
Press z REC once to start recording.
The REC indicator lights in the display window.
6.
Press STOP (x) to stop recording.
The maximum numbers of DVD titles are as show below;
- DVD-R/RW/DVD-RAM: 99
- DVD+R/RW: 49
If the Recorder is powered off during DVD recording, the
recording will not be saved.
Instant T Instant T imer Recording imer Recording
Instant Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
1. Follow steps 1-4 as shown left (Basic Recording
from a TV).
2.
Press z REC repeatedly to select the recording
time length. Recording starts after the first press.
DVD: Each subsequent press increases the record-
ing time by 10 minutes.
Checking the Recording Time
Press z REC or DISPLAY once to check the recording
time. The recalled setting will automatically return to
the TV screen for a moment.
Also, remaining time of recording is shown in the dis-
play window.
To Extend the Recording Time
The recording time can be extended anytime by press-
ing z REC.
Each subsequent press increases the recording time by
10 minutes (DVD).
To Pause the Recording
1.
Press PAUSE/STEP (X) to pause the recording.
2. When you want to continue recording, press
PAUSE/STEP (X) or z REC.
If you press PAUSE/STEP (X) during the Instant Timer
Recording, it will be canceled.
The Recorder will automatically power off when the Instant
Timer Recording ends.
Notes Notes
Notes Notes
TV Broadcast Selected Broadcast
Audio Monitor
Audio L Ch R Ch Audio
MONO MONO MONO MONO MONO
STEREO STEREO L R STEREO
Left L L Left
Right R R Right
MONO MONO MONO MONO
MONO+SAP MONO MONO MONO MONO
SAP SAP SAP SAP
STEREO STEREO L R STEREO
+SAP SAP SAP SAP SAP
MONO MONO MONO MONO