LG RC897T - Manual (Page 50)

50
Initial Settings Initial Settings
In this menu system, there are several ways to cus-
tomize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings.
1.
Press HOME ( ) and the Home menu appears.
2.
Select [Setup] > [Start] and press ENTER ( ).
3.
Use v / V to select the desired option.
4. While the desired item is selected, press B to move
to the second level.
5.
Use v / V to select the second desired option.
6.
Press B to move to the third level.
7. Use v / V to select the desired setting then press
ENTER ( ) to confirm your selection.
Some items require additional steps.
8.
Press RETURN (O O ) or HOME ( ) to exit the
Setup menu.
Press b to go back to the previous level.
General Settings General Settings
Auto Channel Set
This recorder is equipped with a frequency
synthesized tuner capable of receiving the analog and
digital channels.
1.
Select the [Auto Channel Set] option then press B.
2.
Use v / V to select the tuning band (TV or CATV)
option.
TV is for over-the-air antenna reception.
CATV is for cable subscribers.
3. Press B to highlight [Start] icon.
4.
Press ENTER ( ) to begin the channel search.
You can skip the analog channel scanning by press-
ing B while scanning analog channel.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
If you want to change the [Band] option, you must execute
the auto channel search after changing the [Band] option.
This Recorder supports only unencrypted channels for
cable subscribers.
Channel Edit
You can edit a channel manually (add, delete, etc.).
1. Select the [Channel Edit] option then press B .
2.
Press ENTER ( ) while the [Edit] icon is
highlighted. The Channel List menu appears.
3.
Use b / B / v / V to select a channel number then
press ENTER ( ).
Notes Notes
Note Note
First level
Second level
Third level
Settings and Settings and Adjustments Adjustments