LG RC897T - Manual (Page 48)

Dubbing from VCR to DVD Dubbing from VCR to DVD
You can copy the contents of a Video tape to a DVD
using the DUBBING button. This allows you to archive
your old Video tapes to DVD.
1.
Insert a blank DVD disc in the DVD deck and close
the disc tray.
2.
Insert the video tape you wish to copy into the VCR
deck.
3. Select VCR mode by pressing VCR on the remote
control or pressing DVD/VCR on the front panel.
4.
Find the place on the Video tape from which you
want to start dubbing using the PLAY, FF, REW and
PAUSE functions. For best results, pause playback
at the point from which you want to record.
5.
Press the DUBBING button.
The Dubbing menu appears.
6. Use v / V / b / B to select the desired Record
Rec. Mode: XP, SP, LP, EP or MLP.
7.
Select [Dubbing] then press ENTER ( ) or
DUBBING to start copying.
8.
To stop dubbing at any other time,
press STOP (x).
Dubbing will stop automatically when the Video
tape ends.
If the video tape you are attempting to copy is copy
protected, you will not be able to copy the tape. It is not
permitted to copy Macrovision encoded tapes.
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
DUBBING button blinks on the front panel. While in
Pause mode, you can adjust the VCR playback
position using PLAY, REW, FF, PAUSE/STEP, etc. The
DVD deck will remain in Pause mode.
To resume Dubbing, press the DUBBING button twice.
Dubbing from DVD to VCR Dubbing from DVD to VCR
You can copy the contents of a DVD to a Video tape
using the DUBBING button.
1. Insert a blank video tape into the VCR deck.
2. Insert the disc you wish to copy in the DVD deck
and close the disc tray.
3.
Select DVD mode by pressing DVD on the remote
control or pressing DVD/VCR on the front panel.
4.
Find the place on the DVD (or Disc) from which you
want to start dubbing using the PLAY, FF, REW and
PAUSE functions.
For best results, pause playback at the point from
which you want to record.
5.
Press the DUBBING button.
The Dubbing menu appears.
6.
Use v / V / b / B to select the desired Record
Rec. Mode: SP or SLP (3 times SP).
7.
Select [Dubbing] then press ENTER ( ) or
DUBBING to start copying.
8.
To stop dubbing at any other time,
press STOP (x).
You must stop the dubbing process manually when
the DVD movie ends, or the unit may replay and
record over and over again.
If the DVD (or Discs) you are attempting to copy is
copy protected, you will not be able to copy the disc. It
is not permitted to copy Macrovision encoded DVDs (or
Discs). [Copy-protected. Cannot record.] is displayed
on the TV screen.
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
DUBBING button blinks on the front panel. While in
Pause mode, you can adjust the DVD playback posi-
tion using PLAY, REW, FF, PAUSE/STEP, etc. The
VCR deck will remain in Pause mode. To resume
Dubbing, press the DUBBING button twice.
Tip Tip
Note Note
Tip Tip
Note Note
48
Dubbing Dubbing