LG RC897T - Manual (Page 46)

46
A A V1 T V1 T imer Recording using imer Recording using
Set-T Set-T op Channel option op Channel option
1.
Connect a Set-Top Box as shown on page 16.
2.
Make the necessary settings for the connection as
shown on page 56-57.
3.
Important, for the Recorder to record programs
received through the Set-Top Box, the Set-Top box
must remain turned on at all times.
4.
Select [TV] > [Timer Record] and press ENTER ( ).
5. Select [NEW] and press ENTER ( ).
The Timer Record menu will appear.
6.
Enter the necessary information for your timer
recording(s).
b / B (left/right) – Move the cursor left/right
v / V (up/down) – Change the setting at the
current cursor position.
Press RETURN (O
O ) to exit the Timer Record
menu.
7. Set the [Ch.] option to [AV1].
8.
Set the [Media], [Date], [Start Time], [End Time],
and [Mode] options according to previous page.
9. Set the [Set-Top Channel] option.
Select a channel using number or v / V buttons,
the Recorder sends commands to change the
channel of the connected Set-Top Box through
the IR control cable.
Select [OFF] using CLEAR button, if you do not
need the changing the channel of the Set-Top
Box.
10.
Press ENTER ( ) to save the program.
10.
Press ENTER ( ) to save the program.
11.
The “Rec. OK” on the [Check] field on the [Timer
Record List] menu indicates the timer recording is
programmed correctly. “[Check] field according to
previous page”.
12.
Press RETURN (O O ) to exit the [Timer Record List]
menu.
You must insert a recordable tape.
The Timer indicator lights on the front panel display.
The Recorder will automatically power off when the
Timer Recording ends.
There is a short delay when a timer recording finish-
es to confirm the recorded program. If two timer
recordings are set to record sequentially (one right
after the other), the very beginning of the later
program may not be recorded.
You must press STOP (x) to stop the Timer
Recording.
Checking Timer Recording Details
Programming can be checked whenever the Recorder
is turned on.
1.
Press HOME ( ) and the Home menu appears.
2.
Select [TV] > [Timer Record] and press ENTER ( ).
3.
Use v / V to select a program.
4.
Press ENTER ( ) to edit the selected program.
Timer Record menu appears.
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
Use v / V to select a program you want to erase on
the Timer Recorder List, then press CLEAR and
select [OK] than press ENTER ( ).
If you fail the AV1 Timer Recording
Make sure IR Control Cable connection. (page 16)
Set the [Set-Top Box Edit] options again then proceed the
[Test] option. (page 56-57)
If IR control is not activated even though you set again, the
Recorder may not control your Set-Top Box according to
the device’s maker or status.
Confirm recommended Set-Top Box on page 16 or
contact your Set-Top Box provider.
Notes Notes