Rear, Troubleshooting & repair – Lincoln Electric INVERTEC V350-PRO SVM152-A User Manual
Page 128
Advertising
PROCEDURE
1. Remove input power to the V350-PRO.
2. Using a 5/16” nut driver remove the case wrap-
around cover.
3. Perform the Input Filter Capacitor Discharge
Procedure detailed earlier in this section.
4. Remove the caps on the two wire feeder recepta-
cles.
5. Using a phillips head screwdriver remove the two
mounting screws from each wire feeder recepta-
cle. See Figure F.40.
6. Using a 5/16” nut driver remove the four screws
from the top and bottom of the back of the
machine. See Figure F.40.
TROUBLESHOOTING & REPAIR
CURRENT TRANSDUCER REMOVAL AND REPLACEMENT (continued)
F-90
F-90
V350-PRO
O F F
O F F
O F F
OFF
Wire Feeder Receptacle
Mounting Screws
Plastic
Nut
5/16" Mounting Screws
REAR
FIGURE F.40 – CASE BACK SCREW LOCATIONS
Advertising