Troubleshooting & repair, Control board removal and replacement (continued) – Lincoln Electric INVERTEC V350-PRO SVM152-A User Manual
Page 94
17. Replace the four 3/8” mounting nuts at the cor-
ners of the board.
18. Replace plugs #J3, #J4, #J5, #J6, #J7, #J8, #J9,
#J10B, and #J10A previously removed.
19. Using a 5/16” nut driver, replace the metal plate
on the top of the machine that holds the case
front assembly to the center panel. Replace all
cable ties previously removed.
20. Replace the four phillips head screws removed
from the front of the machine located around the
two welder output terminals.
21. Replace the six phillips head screws and their
washers from around the input power switch.
22. Using a 5/16” nut driver replace the four screws
previously removed from the front of the machine
23. Replace the case wraparound cover.
TROUBLESHOOTING & REPAIR
CONTROL BOARD REMOVAL AND REPLACEMENT (continued)
F-56
F-56
V350-PRO