Life Fitness GS4 - Manual (Page 10)

10
FIGURE 9
STEP 9:
3/8 X 4-3/4” 7
5
4
12
14
3/8” LOCK NUT
SEAT FRAME
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the
SEAT FRAME using one 3/8 X 4-3/4” BOLT (7), two STEP SPACERS 1-9/16” (14), and one 3/8” LOCK NUT (12) as shown in
FIGURE 9. Make sure the CABLE is in the grooves of all the pulleys.
FIGURE 10
STEP 10:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the MAIN
ARM using one 3/8 X 2-3/4” BOLT (9), two STEP SPACERS 19/32” (13) and one 3/8” LOCK NUT (12) as shown in FIGURE 10. Make
sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 9
5
4
12
13
MAIN ARM