Figure 5, Figure 6 – Life Fitness GS4 User Manual
Page 8
FIGURE 5
8
3
12
11
10 3/8 X 1-3/4”
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the
BRACKET (from 100 LEG PRESS kit) using one 3/8 X 1-3/4” BOLT (10), one 3/8” WASHER (11), one “L” CABLE RETAINER (3)
and one 3/8” LOCK NUT (12) as shown in FIGURE 5. Make sure the CABLE is in the grooves of all the pulleys.
• SECURELY attach the BRACKET (from LP5 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-3/4” BOLTS (7), two 3/8” WASH-
ERS (11), and two 3/8” LOCK NUTS (12). See FIGURE 5.
7 3/8 X 4-3/4”
5
4
LEG PRESS BRACKET
STEP 5:
FIGURE 6
STEP 6:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the
bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (10) and one 3/8” LOCK NUT (12) as shown in FIGURE 6. Make sure the
CABLE is in the grooves of all the pulleys.
3/8 X 1-3/4” 10
5
4
12
SEAT FRAME