Life Fitness GS4 - Manual (Page 9)

9
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 7
STEP 7:
3/8 X 4-3/4” 10 5
4
12
14
3/8 LOCK NUT
SEAT FRAME
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the SEAT
FRAME using one 3/8 X 4-3/4” BOLT (7), two STEP SPACERS 1-9/16” (14) and one 3/8” LOCK NUT (12) as shown in FIGURE 7. Make
sure the CABLE is in the grooves of all the pulleys.
MAIN ARM
FIGURE 8
STEP 8:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to the
MAIN ARM using one 3/8 X 2-3/4” BOLT (9), two STEP SPACERS 19/32” (13) and one 3/8” LOCK NUT (12) as shown in FIGURE
8. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 9
4
12
13
5