Life Fitness GS4 - Manual (Page 7)

FIGURE 4
7
2
5
CABLE GUIDE
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
STEP 4:
• Assemble one 3-1/2 PULLEY (5) to the PULLEY HOUSING (2) using one 3/8 X 1-3/4” BOLT (10) and one 3/8” LOCK NUT (12) as shown
in FIGURE 4(b). NOTE: CABLE MUST BE PLACED IN PULLEY HOUSING BEFORE INSTALLING PULLEY
• Route the LEG PRESS CABLE (3) around one 3-1/2” PULLEY (5) and re-assemble the PULLEY to the FLOATING PULLEY PLATES
usingthe BOLT, NUT and PULLEY which were removed. See FIGURE 4.
• Screw the threaded end of the LEG PRESS CABLE (4) into the end of the FLOATING PULLEY BRACKET. Secure the CABLGUIDE
in place with the JAM NUT on the GUIDE CABLE. See FIGURE 4(a)
10
12
5
4(a)
4(b)
3/8 X 1-3/4”