Lexmark 4800 - Manual (Page 73)

8 Press to preview the output.
9 Press to adjust the settings.
10 Repeat step 8 to step 9 as needed.
11 Press to save your settings temporarily.
12 Press .
Related topics:
• “Loading original documents on the scanner glass” on page 32
• “Using the control panel” on page 78
• “Understanding the Copy Mode menu” on page 79
Sharpening an image
1 From the Finder desktop, double-click the Lexmark 4800 Series folder.
2 Double-click the Lexmark 4800 Series Center icon.
3 Click Preview/Edit to open the Scan dialog.
4 From the Scan dialog, click to open the Scan Settings drawer.
5 Click the Adjustments tab.
6 From the Blur/Sharpen area, move the slider to adjust the level of sharpness of the scanned image.
Related topics:
• “Customizing scan settings from the Scan dialog” on page 42
• “Enhancing photo print quality using the software” on page 72
Transferring photos from a memory device to the computer over a wireless
network
If the printer is connected to a computer through a wireless network connection, you can transfer photos from a
memory card or flash drive to the computer.
Note: The printer may require that you select a computer (and a PIN, if required by that computer).
1 Insert a memory card or flash drive containing the images you want transferred.
2 From the Finder desktop, double-click the Lexmark 4800 Series folder.
3 Double-click the Network Card Reader icon.
4 Select the printer you want to use.
Note: You need to add a printer to the Source list before you can select a printer to use. For more information,
see “Using the Network Card Reader” on page 91.
5 Click .
Working with photos
73