Lexmark 4600MFP - Manual (Page 25)

Paper Menu
25
Using the MFP menus
Paper Loading
These menu items are used to set the loading orientation for each print media type. A source is loaded with preprinted print
media, and then the MFP can be notified that the print media is loaded for duplex (two-sided) printing. Use the application
software to indicate simplex (one-sided) printing. When simplex printing is selected, the MFP automatically inserts blank
pages to print the simplex job correctly.
Paper Loading is only shown on the control panel if a duplex unit is installed.
Custom Types
This menu item is used to define a name for each custom paper type. Assign names using a utility such as MarkVision or
from the control panel.
Vinyl Labels Weight Identifies the relative weight of the
vinyl labels loaded in a specific
source.
Light
Normal*
Heavy Shown if vinyl labels are a supported
type.
Custom <x> Weight Identifies the relative weight of the
custom paper loaded in a specific
source. (x represents 1—6.)
Light
Normal*
Heavy Shown if the custom type is
supported in the specified source.
Menu item Purpose Values and descriptions
Card Stock Loading Properly handles the specific
preprinted print media whether the
job is a duplex job (two-sided) or a
simplex job (single-sided).
Duplex
Off* Duplex is for two-sided printing on
the print media, and off indicates that
duplex printing is turned off.
Labels Loading
Bond Loading
Letterhead Loading
Preprinted Loading
Colored Loading
Vinyl Labels
Loading Duplex
Off* Shown if vinyl labels are supported
in the specified source.
Custom <x>
Loading Properly handles preprinted custom
paper whether the job is a duplex job
(two-sided) or a simplex job
(single-sided). (x represents 1—6.) Duplex
Off* Shown if the custom type is
supported in the specified source.
Menu item Purpose Values and descriptions
Custom Type <x> Specifies the type of print media
associated with each Custom Type
available in the Paper Type menu. Paper*
Card Stock
Transparency
Labels
Vinyl Labels
Envelope The custom type print media must
be supported in the designated
source in order to assign a user-
defined name.
Once the name is assigned, the
name appears instead of Custom
Type <x>
.
Menu item Purpose Values and descriptions