Lexmark 4600MFP - Manual (Page 65)

Settings
65
Using the MFP menus
E-mail Settings
Menu item Purpose Values and descriptions
E-mail Server Setup See E-mail Server Setup on page 33.
Format Specifies the format of the file to be
scanned. PDF* Portable Document Format
JPEG Joint Photographic Experts Group
TIFF Tagged Image File Format
PDF version Sets the version of an Adobe Acrobat
PDF file that is sent.
This menu item applies to all scan
functions. 1.2
1.3
1.4
1.5
1.6
Content Specifies the type of content
contained in the e-mail. Text The e-mail job contains mostly text or
line art.
Text/Photo* The e-mail job contains a mixture of
text and images.
Photo The e-mail job contains only images.
Color Specifies if the MFP recognizes a
color image in the e-mail or sees the
color image in gray shades. Gray* Does not send a color image in the
e-mail job.
Color Sends the e-mail job with a color
image enclosed.
Resolution Specifies the resolution of the e-mail
in dots per inch (dpi).
Resolution is limited by the value set
for the Color menu item. If this value
is set to Color and Resolution is set to
400 or 600 dpi, the configuration is
allowed, but it is not seen in the
normal workflow, so the combinations
are invalid. The resolution is reduced
to 300 dpi. 75 dpi
150 dpi
200 dpi
300 dpi
400 dpi
600 dpi 75—600 dpi are available for Gray.
75—300 are available for Color. See
Color listed previously.
Darkness Specifies the level of darkness for the
e-mail as a graphic representation of
a page that uses a fill pattern to
indicate various levels from light (1)
to dark (9). 1—9 (5*) Specifies the level of darkness for the
e-mail.
A graphic representation depicts the
values. As the
right or left scroll
button is touched, the asterisk moves
back and forth on the line. 1 is next to
the - and 9 is next to the +. As shown,
5 is the current value.
- +