Lexmark 4600MFP - Manual (Page 98)

Understanding MFP messages
98
2
Understanding MFP messages
Messages appear on the MFP control panel describing the current state of the MFP and indicating possible MFP problems
requiring intervention.
Status messages
Status messages provide information on the status of the MFP.
Message Meaning Action
Bin [x] Full x represents the number of the
output bin that is full when the MFP
bins are linked. Remove print media from the bins. The message
clears once the output level of the linked bins is no
longer full.
Note: The message appears on the Menu Settings
Page also. See
Menu Settings Page for more
information.
Busy The MFP is busy receiving,
processing, or printing data. Press Stop to access the job queue.
Flushing Buffer The MFP flushes corrupted data and
discards the current print job.
Hex Trace The MFP is in Hex Trace mode.
Hex Trace isolates the source of a
print job problem. When Hex Trace
is active, all data sent to the MFP
prints in hexadecimal and character
representation. Exit Hex Trace to print jobs normally. To exit Hex
Trace, unplug the MFP.
[linked set bin
name] Full The linked set of bins with a
previously defined name is full. Remove print media from the bins. The message
clears once the output level of the linked bins is no
longer full.
Note: The message appears on the Menu Settings
Page also. See
Menu Settings Page for more
information.
Maintenance The MFP maintenance counter has
exceeded its limit, so the MFP
requires maintenance. Replace the maintenance items. If necessary, reset
the MFP maintenance counter.
Network
Network [x]
Network [x], [y] A network interface is the active
communication link. Wait for the message to clear.
Notes:
• The current interface appears on the Menu Settings
Page. Interfaces shown without an x or y means
the active host interface is a standard interface.
• x indicates the active interface is connected to the
MFP through PCI connector x.
• x, y indicates the active interface is connected to
the MFP through channel y on PCI connector x, or
that x equals 0 on the standard network interface.
Parallel
Parallel [x] A parallel interface is the active
communication link.
Serial [x] A serial interface is the active
communication link.
USB
USB [x] The MFP is processing data through
the specified USB port.
[PJL RDYMSG] This is the Printer Job Language
(PJL) Ready message.