LevelOne WBR-6000 - Manual (Page 23)

N_One Wireless Broadband Router
MAC Filter
MAC Filter There are 3 options:
• Disabled - Select this if you don't want to use Wireless MAC
Filter function.
• Allow - Only the client Listed in the Station can connect to
this Wireless Router .To edit the wireless stations Please
click the "Set Stations".
• Deny - The client listed on the stations can not use the
access point, others can use this access point to access the
internet or LAN.
Set Stations
Button Click this button to manage the MAC Address control stations.
Draft 802.11n Setting
Bandwidth Select the desired bandwidth from the drop-down list.
20MHz Only – Single Channel Bandwidth
40MHz Only – Dual-Channel Bandwidth; combine channels
result with high performance.
20MHz/40MHz Auto – Auto Selection, this is the default setting.
Wireless Broadband Router will auto selection depend on the
bandwidth demand.
Please note that selecting 20MHz Only or 40MHz Only might
cause connection problem due to unmatched setting with client
devices. Auto Selection is highly recommended.
Protected
Mode Select On or Off for protected mode. When Protected Mode is
ON, 802.11n Draft transmission will be treated as first priority.
22