LevelOne WBR-6000 - Manual (Page 33)

N_One Wireless Broadband Router
5. Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the
default Windows setting. Using this is recommended. By default, the Wireless
Broadband Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Wireless Broadband
Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making
the following changes.
• Enter the Wireless Broadband Router's IP address in the Default gateway field
and click OK. (Your LAN administrator can advise you of the IP Address they as-
signed to the Wireless Broadband Router.)
• If
the DNS Server fields are empty, select Use the following DNS server ad-
dresses, and enter the DNS address or addresses provided by your ISP, then
click OK.
32