LevelOne WBR-6000 - Manual (Page 89)

N_One Wireless Broadband Router
(The Access Point is always in "Infrastructure" mode.)
SSID (ESSID) Wireless Stations should use the same SSID (ESSID) as the
Access Point they wish to connect to. Alternatively, the SSID
can be set to "any" or null (blank) to allow connection to any
Access Point.
Wireless
Security The Wireless Stations and the Access Point must use the same
settings for Wireless security. (None, WEP, WPA-PSK).
WEP: If WEP is used, the Key size (64Bit, 128Bit), Key value,
and Authentication settings must be the same on the Wireless
Stations and the Access Point.
WPA-PSK: If WPA-PSK is used, all Wireless Stations must be
set to use WPA-PSK, and have the same Pre-shared Key and
encryption system.
For Ad-hoc networks (no Access Point), all Wireless stations
must use the same security settings.
88