LEICA 2 User Manual

Page 14

Advertising
background image

14

Getting started with new equipment

GPS Equipment User Manual -2.0.0en

Measuring with the default configuration parameters, continued

Some basic decisions have to be
made in this panel:
Which configuration set should be
activated, which job the raw data
should be stored and which antenna
set-up should be used.

A Configuration Set (Config Set) is a
collection of certain sensor param-
eters needed to perform a certain
operation, like data recording rates,
point id templates, data formats,
antenna types, coding methods, etc.

Several default configuration sets
exist which cover standard survey
scenarios. How to create new con-
figuration sets is described in a later
chapter as well as in the Technical
Reference Manual.

For static survey you should select
the PP_STAT configuration set. You
can make this selection either by
using the cursor left key to toggle
between all available configuration
sets until PP_STAT appears or you
can highlight the input field and press
ENTER. Then a list box comes up
showing all available sets:

Step 4: Begin a Survey

Enter the Survey operation by either
pressing 1 in the Main\ panel or by
first navigating to 1 Survey via
cursor keys and then pressing
ENTER or F1 CONT.

The following panel will appear:

Advertising