LEICA 2 - Manual (Page 2)

2 GPS Equipment User Manual -2.0.0en
The instrument model and the serial number of your
product are indicated on the typeplate.
Enter the model and serial number in your manual and
always refer to this information when you need to contact
your agency or authorized service workshop.
GPS Receiver (SR) Type: Serial No.:
Terminal (TR) Type: Serial No.:
External Antenna (AT) Type: Serial No.:
The symbols used in this user manual have the following
meanings:
DANGER:
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING:
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, could
result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, may result
in minor or moderate injury and/or appreciable
material, financial and environmental damage.
Important paragraphs which must be adhered to
in practice as they enable the product to be used
in a technically correct and efficient manner.
Meanings of symbols
Congratulations on your purchase of a new System
GPS500 from Leica Geosystems.
This manual contains important safety
directions
(refer to section "Safety
Instructions") as well as instructions for
setting up the product and operating it.
Read carefully through the User Manual before you
switch on the instrument.
System GPS500
Product identification