Liebert UPStation GXT - Manual (Page 9)

5
MAJOR COMPONENTS
The following is a general description of each
component and its functions. Please review this
section carefully, as it will give you a better
understanding as to how the UPStation GXT 6 kVA
Maintenance Bypass operates.
B YPASS S WITCH
The Bypass Switch allows easy and rapid transfer
of connected loads between the UPS and bypass
source.
C ONFIGURABLE O UTPUT D ISTRIBUTION
Several receptacle and hardwire options are
available as user-selectable output distribution.
These are factory-configured when ordered and
also allow for field upgrades. Common receptacle
and hardwire options include:
15 Amp Options
5-15R2
L5-15R2
6-15R2-208
6-15R2-240
L6-15R2-208
L6-15R2-240
15A, 120V, 1 Pole Breaker for 1/2" & 3/4" conduit
15A, 208V, 2 Pole Breaker for 1/2" & 3/4" conduit
15A, 240V, 2 Pole Breaker for 1/2" & 3/4" conduit
20 Amp Options
5-20R2 (T-Slot)
L5-20R
L6-20R-208
L6-20R-240
L14-20R-240
20A, 120V, 1 Pole Breaker for 1/2" & 3/4" conduit
20A, 208V, 2 Pole Breaker for 1/2" & 3/4" conduit
20A, 240V, 2 Pole Breaker for 1/2" & 3/4" conduit
30 Amp Options
L5-30R
L6-30R-208
L6-30R-240
L14-30R-240
30A, 120V, 1 Pole Breaker for 1/2" & 3/4" conduit
30A, 208V, 2 Pole Breaker for 1/2" & 3/4" conduit
30A, 240V, 2 Pole Breaker for 1/2" & 3/4" conduit
Other Options
Single Position Blanking Plate
Hardwire Options
Single Position Plate with 1/2", 3/4" and 1"
conduit knockouts
Double Position Plate with 1-3/4" and 2"
conduit knockouts