Logic 3 V5.00 - Manual (Page 58)

3xLogic Vigil System Server Software - User’s Guide Doc# 08100610 Page 58
ork cameras, including HTTP cameras, Acti, IQeye,
anasonic, Sanyo, other Vigil Server DVRs, and more.
Vigil Server currently supports several types of netw
P
The type of network camera. See section 15 Supported Network Cameras for a
complete list
Type of all supported network cameras and recommended settings
configurations.
Address
HTTP address of
the camera (do not include “http://” at the beginning of the address).
The camera address of the IP camera, or if this is an HTTP camera, the
Web/Camera
Settings
to the camera’s web interface to make changes to the camera’s internal
settings.
Connects
Port The network port to connect with the camera.
Channel eans the first video input on the DVR, channel 1
means the second video input, etc.
This option is used for connecting to other Vigil Server DVRs. The channel refers to
which camera to use. Channel 0 m
URL Set this to the camera URL, if used.
Stream Type
e camera. Note that for some cameras; only one type
of stream is available at a time.
Sets the video stream type of th
Timeout
fore timing out. If the
timeout is reached, “Signal Loss” is displayed in the live screen.
The number of seconds to attempt to connect to the camera be
Decoding FPS U intensive feature, use
with caution. For most applications leave this setting at 1 FPS.
This is the number of frames that is displayed in the live viewer. It is also the number
of frames that will be tested per second for motion. This is a CP