Logic 3 V5.00 - Manual (Page 61)

Here you configure which regions of the video image are to be used for motion detection. To do this, simply
draw on the video window. A semi-transparent overlay will be drawn over top of the video. This marks the
motion detection region. To clear motion detection regions, click and draw on them and they will be
removed.
Invert Swaps masked and clear regions.
Clear Clears all masked areas.
Set All Masks the entire image for motion detection.
Test Motion
The preview window will display the motion detection blocks and their real-time motion
values. Values highlighted in yellow with red text have met your motion detection
settings. You can use the motion detection values reported to tune the “Motion
Sensitivity” slider.
3xLogic Vigil System Server Software - User’s Guide Doc# 08100610 Page 61