Logic 3 V5.00 - Manual (Page 65)

3xLogic Vigil System Server Software - User’s Guide Doc# 08100610 Page 65
Allows you to set up a pattern, preset, or tour after an alarm input has been triggered. Can be used to turn a
PTZ camera to a specific doorway for example. You must first assign the input to the specific PTZ camera in
the “Alarms/Relays” tab in the “Settings” window.
Input dropdown Select which digital input to use as the trigger event.
Mode
Selects which action to apply after the alarm event has been triggered. Available
options are “Patterns”, “Presets”, and “Tours”.
Name/Number
Enter the name or number of the pattern, preset, or tour to apply on the alarm
event.
Auto Restart PTZ
After Alarm
After the alarm event is over, allows you to select a pattern, preset, or tour to run.
Dwell Time
If enabled, this time must elapse before the camera will auto restart its selected
pattern, preset, or tour.