Lenovo L2230x - Manual (Page 14)

Chapter 2.
2-5
Input video signal
This monitor can accept video signals through two
different connectors. Most desktop computers use
a D-SUB connector
- Selects D-SUB (Analog)
Same as Analog
Options Information
Shows resolution, refresh rate, and product details.
Note: This screen does not allow any changes to
the settings. Same as Analog
Menu Language
This section lists the languages supported by your
monitor.
Note: The language chosen only affects the
language of the OSD. It has no effect on any
software running on the computer.
Menu Position
Menu position adjusts menu location on the
screen.
Default:
Default returns the menu position to the default
settings.
Custom:
• Horizontal: Changes the horizontal position of
the OSD.
• Vertical: Changes the vertical position of the
OSD.
Reset
• Cancel
• Reset
• Save
Resets monitor to the original factory settings.
Accessibility
Controls button and menu settings for accessibility
preferences.
Button repeat rate:
Select or to change.
• Off
• Default
• Slow
Menu time out: Sets the length of time the
OSD will remain active after the last time a button
is pressed.
Table 2-2. OSD functions
OSD Icon on Main
Menu
Submenu Description
Controls and
Adjustments
(Analog)
Controls and
Adjustments
(Digital)
- Selects USB(Digital)
. When current source in USB
and switch source to USB, it is Toggle Key of the
Extend mode
and the Mirror mode.
Scaling
• Original AR:same aspect ratio with input
signal
• Full Screen :expand image to full screen
• Selects type of scaled image
Exit
Exit from menu. .
The Extend mode and the Mirror mode can be
changed circularly by selecting this icon.