Installing the monitor driver in windows xp, Installing the monitor driver in windows 2000, Installing the device driver in windows vista – Lenovo L2230x User Manual
Page 23
3-6
L2230x Wide USB Port Replicator Monitor User's Guide
Installing the monitor driver in Windows Vista
To install the device driver in Microsoft® Windows Vista, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows Vista.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
Vista operating system.
4. Open the
Display Properties
window by clicking
Start, Control Panel
and then double-clicking the
Hardware and Sound
icon.
5. Click the
Personalization icon.
6. Click the Display Settings icon.
7. Click the Advanced Settings button.
8. Click the
Monitor
tab.
9. Click the Properties button.
11. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on
Update
Driver
and then click the "Browse my computer for driver software" button.
12. Select “Let me pick from a list of device drivers on my computer” .
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and corresponding Color Matching
Profiles.
10. Click the Driver
tab.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
.
13. Click the Have Disk button. Click on the Browse button and navigate to the
following directory:
X:\Monitor Drivers\Windows Vista
(where X is the drive letter designator for the CD-ROM drive).
14. Select the "LEN154D .inf" file and click the Open button. Click the OK button.
15. Select LEN L2230xwA and click Next. The files will be copied from the CD to your
hard disk drive.
recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate
of 60 Hz..