Lenovo L2230x - Manual (Page 27)

For the Windows XP operating system:
a. Click the Audio tab.
b. Select a USB audio line-out device from the Sound playback list, and
select a USB
audio line-in device from the Sound Recording list.
c.
If you can not use USB microphone connector (red) , you can Click “ Test hardware(T)"
on the Audio tab.
For the Windows Vista or Windows 7 operating system:
Click the Playback tab to select a USB audio line-out device and click the Sound
Recording tab to select a USB audio line-in device.
Using the USB 2.0 connectors
Connect a USB device to any of the three USB connectors on the monitor
with a USB
cable. When the device is correctly connected to the USB
connector on the monitor,
an information window will be displayed in the taskbar notification area on your computer
screen, indicating that the USB
device has been connected to the system.
Using the Ethernet connector
Connect a standard 10 Mbps / 100 Mbps Ethernet connector to the Ethernet
connector on
the monitor, and wait until the device is fully configured by the Windows operating system.
Using Digital (USB) Video
1. L2230x Wide
USB Port Replicator monitor can work in two video modes:
Extend mode and Mirror mode
a. Extend mode
The Extend mode splits your display across multiple monitors. There are two options
when using the Extend mode:
(1) System -Primary: In this mode, your computer display will be the primary display
and L2230x Wide USB Port Replicator monitor will be the secondary display.
(2) Second Display -Primary: In this mode, L2230x Wide USB Port Replicator Monitor
Extend mode and monitor will be the primary display and your computer display
will be the secondary display.
b. The Mirror mode clones your computer screen to the monitor. The port replicator
automatically selects the settings (screen resolution,
color quality, and refresh rate)
for the external monitor, which will enable
the best resolution based on your computer
settings.
2. To switch between the Extend mode and the Mirror mode, you can press OSD source key
of L2230x Wide USB Port Replicator monitor. It takes a few seconds to switch between the
Extend mode and the Mirror mode. During the transition, the display indicators will
alternatively turn on and off until the
port replicator finishes configuring the selected mode.
You can wait until the new settings take effect and decide whether to modify the
video settings or not.
To switch the video output modes, also depending on the operating system you are using,
do one of the following:
L2230x Wide USB Port Replicator Monitor User's Guide
4-2