Lexmark 2500 - Manual (Page 38)

7 Move the left paper guide so that the print start position you want aligns with the [A symbol printed on the
margin guide.
The distance from the left paper guide to the [A symbol determines the width of the left margin.
8 Place a cut form or an envelope against the left paper guide.
Note: If you are loading a preprinted form or envelope, put the top edge in first with the printed side up.
9 Move the right paper guide so the guide aligns with the right edge of the cut form or envelope.
1 Left paper guide
2 Cut form or envelope
3 Right paper guide
10 Insert the cut form or envelope into the printer until the Paper Out light stops blinking.
Loading paper
38