Lexmark 2500 - Manual (Page 48)

Understanding Setup mode and menu
options
The printer is preset at the factory for font, pitch, form length, and other settings. These are called factory default
settings. This chapter describes how to change the factory default settings, how to set up macros, and how to set
form length.
Using Setup mode
Note: Make sure continuous forms are loaded in the printer when using Setup mode.
1 Open the control panel to access layer 2.
2 Press Setup to put the printer in Setup mode and print the Main menu.
3 Press LineFeed to print a list of available options you can change.
Understanding Setup mode and menu options
48