Lexmark 2500 - Manual (Page 84)

optional Tractor 2 Feeder positions
paper incorrectly 71
paper fed from Auto Sheet Feeder
is skewed 72
paper fed in Auto Sheet Feeder
jams at printer entrance 70
paper jammed in Auto Sheet
Feeder 70
printer does not feed from Auto
Sheet Feeder 71
printer does not feed paper 70
paper feed, troubleshooting
Auto Sheet Feeder feeds at
incorrect rate 71
paper paths
pull tractor 25
push tractor 25
paper sizes
supported by the printer 43
paper types
supported by the printer 43
pitch
locking 22
selecting 22
pitch lock
disabling 22
print quality troubleshooting
characters are wrong or
missing 74
dots are missing or print quality is
poor 73
graphics do not print 74
incorrect line length 68
incorrect line spacing or
overprinting occurs 75
incorrect number of lines on a
page 74
lines do not start at left
margin 68
print is too light 73
printer goes to Tear Off position
before job finishes 67
smudged forms or print too
dark 74
specified font or pitch is not
printing or is changing 69
print troubleshooting
buttons do not work 68
incorrect characters print, left
margin changes, or printing
stops 69
left margin moves right during
printing 68
Print test works, but printer does
not print when attached to the
computer 66
printer alarm sounds 67
printer is noisy 67
printer power switch is on, but the
power light is off 68
printer sounds like it is printing,
but does not print 67
printer speed slows 68
printing continues beyond edges
of continuous forms 69
printer
cleaning 57
features and functions 10
overview 8
parts 8
test 62
printer status
checking 63
printer test page
interrupting or stopping 62
running 62
printing
demonstration page 12
from DOS 14
from Windows 14
network setup page 14
pull position
tractor 44
pull tractor
converting 46
paper paths 25
push position
tractor 44
push tractor
converting 45
paper paths 25
R
recycling
Lexmark products 58
WEEE statement 79
ribbon cartridge
removing 57
S
safety information 7
security
supporting IPSec 60
supporting SNMPv3 60
using 802.1x authentication 61
setting
Top-Of-Form 40, 41, 42
Setup mode
Control options 54
Data options 52
Emulation options 55
Forms Macro options 51
Interface options 56
Main menu options 50
using 48
SNMPv3 60
supplies
ordering 57
T
Tear Off function
using 25
Tear Off position
setting 25
Top-Of-Form
setting 40, 41, 42
tractor
pull position 44
push position 44
Tractor mode
selecting 21
troubleshooting
checking an unresponsive
printer 62
contacting Customer Support 75
restoring factory default
settings 59
troubleshooting, jams and
misfeeds
paper is jammed in the printer 69
troubleshooting, paper feed
Auto Sheet Feeder feeds at
incorrect rate 71
Auto Sheet Feeder feeds multiple
sheets 72
Auto Sheet Feeder positions paper
incorrectly 72
incorrect Top-Of-Form
position 71, 72
jam in Tractor 2 Feeder 70
optional Tractor 2 Feeder does not
feed 71
Index
84