Laser beta lasermike LS8000-3 - Manual (Page 107)

LaserSpeed 8000-3 Instruction Handbook
LaserTrak Software
Part No. 93463 / Drawing No. 0921-01561 Page 107 of 221 Revision A (Sep 2007)
Standard Tab- shows common operating parameters for
the LaserSpeed gauge. These parameters can be
used to tailor the gauge operation to fit a specific
application. The entry fields are either direct entry
or a pull-down menu. Once all the operating
parameters are set, press the Update button to
update the parameters in the gauge. A tool tip will
indicate the range of numbers valid for that entry field when the cursor
is placed over a direct entry field for a few seconds. For the direct entry
field the number can be entered
without a carriage return. Just enter
the number and move to the next
field.
Once the parameters in the gauge have
been updated to the gauge, they are
permanently stored in the gauge until a
different set of operating parameters are
Updated to the gauge.
Communication Tab- screen shows the
communication parameters used by the
gauge to communicate via RS232, RS422
and Ethernet.
Once the parameters in the gauge have
been updated to the gauge, they are
permanently stored in the gauge until a
different set of operating parameters are
Updated to the gauge.