Laser beta lasermike LS8000-3 - Manual (Page 150)

LaserSpeed 8000-3 Instruction Handbook
RS-232/RS-422 Communication
Part No. 93463 / Drawing No. 0921-01561 Page 150 of 221 Revision A (Sep 2007)
*GINFO
Gauge Model and Serial Number
*GINFO?<CR>
Read Only Command
Response Format: *GINFO=<LS8000-3XXX#XXXX-XXX-XXXX><CR>
This read-only command can be used to read back the LS8000-3 model number and serial
number. The text before the # character indicates the Model Number, and the text after the
# character indicates the Serial Number.
Example:
Command: *GINFO?
Response: *GINFO=LS8000-310X#1234-567-890
This response indicates a model number of "LS8000-310X", and a serial number of "1234-
567-890"
*ETHERNET
Ethernet Enabled
*ETHERNET?<CR>
Read Only Command
Response Format:
*ETHERNET=<N><CR>
This is a read-only command that returns 1 if the Ethernet option is installed, and 0 if the
Ethernet option is not installed.
If the Ethernet option is not installed, then all Ethernet settings can be disregarded.
*MACID
Ethernet Hardware ID
*MACID?<CR>
Read Only Command
Response Format:
*MACID=<XX:XX:XX:XX:XX:XX><CR>
This read-only command returns the Ethernet hardware ID. Each LS8000-3 is assigned a
unique identifier, even if the Ethernet option is not installed.
This setting can be disregarded if the Ethernet option is not installed.