Laser beta lasermike LS8000-3 - Manual (Page 144)

LaserSpeed 8000-3 Instruction Handbook
RS-232/RS-422 Communication
Part No. 93463 / Drawing No. 0921-01561 Page 144 of 221 Revision A (Sep 2007)
The output will clear when the length reaches 200ft, and the Index Pulse triggers. See the
Index Pulse & Length Thresholds section for timing details.
$H
High Speed Pulse Output Configuration
$H<CR>
Read
Response Format:
<N>
$H<N><CR>
Set
<N>
is an integer that specifies the function of the High Speed Pulse Output. The various
outputs were described previously in the Index Pulse Output Function description.
Pulse Output Function
Value
Phase A Phase B
0 Default (High Speed Pulse Outputs)
1 System Ready Material Present
2 System Ready Valid
3 System Ready QF Pulse Output
4 System Ready QF Warning Output
5 System Ready Shutter Open
6 System Ready Laser On
7 System Ready Thermostat Output
8 Valid Thermostat Output
9 Pulse Phase A Sync Output
Note: Some of the above outputs were previously described under the Index Pulse Output
Function setting.
Sync Output
Gauge-Gauge Synchronization Output that can be connected between multiple gauges in
order to synchronize measurements. See the
Gauge-Gauge Synchronization section for
details.
L
High Speed Pulse Rate
L<CR>
Read
Response Format:
<N>
L<N><CR>
Set