Lava Computer 650 - Manual (Page 3)

Quick Install
Windows 95/98/ME/2000/XP
1. With the power off, insert the LavaPort-650 PCI card into any free PCI
slot.
2. Launch Windows - new hardware will be detected.
3. When prompted, insert the LavaPort-650 installation diskette point
Windows to look at the floppy's root directory.
4. After Windows has booted, click the Start button, then Settings,
Control Panel, System, Device Manager, Ports. The LavaPort-650 port
will be listed as one of your Com Ports. Click “Properties” to change
the default settings as desired.
5a. For Windows 95/98/ME, install the Lava Com Port Redirect and Lava
Modem Speed Set utilities to change the Com numbers of your
ports, and to automate modem speed settings.
5b. For Windows 2000/XP, you can redirect your Com ports by Right
Clicking My Computer > Properties > Hardware > Device Manager >
double click the Lava Port you want to change > Port Settings >
Advanced and under Com Port Number, you can change the port
number from the drop down menu.
3