Lava Computer 650 - Manual (Page 5)

Windows Driver Installation
1. Once the LavaPort-650 is installed in your PC, start your computer.
Windows will automatically detect the LavaPort-650 as a new PCI
Serial Controller and ask you to insert the LavaPort Installation
diskette. The installation files are located in the root directory of this
disk.
2. After the necessary files have been copied, Windows will complete
the full installation of the LavaPort-650. During this process, a new
Com Port will be created in Device Manager under the Ports tree.
The following describes how you may customize this port for your
personal needs.
Windows Installation
Note: Note: Make sure that you are installing
the correct LavaPort-650
drivers for the appropriate operating system.
DO NOT install NT or Windows 3.x drivers
under Windows95/98/ME/2000/XP
5