LSI U80ALVD - Manual (Page 19)

LSIU80ALVD PCI to Ultra2 SCSI Host Adapter 2-1
Chapter 2
Installing the
LSIU80ALVD
This chapter provides instructions on how to install the LSIU80ALVD and
includes these topics:
•
Section 2.1, “Quick Installation Procedure,” page 2-1
•
Section 2.2, “Detailed Installation Procedure,” page 2-3
•
Section 2.3, “Completing the Installation,” page 2-24
2.1 Quick Installation Procedure
This section is provided for the experienced computer user with prior host
adapter installation and SCSI bus setup experience. If you prefer a more
detailed guidance for installing the LSIU80ALVD, follow the instructions
in the
Section 2.2, “Detailed Installation Procedure.”
For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before removing this host adapter board.
Remove the LSIU80ALVD from the packing and check that it is
not damaged. An example of this host adapter board is shown
in
Figure 2.1 .
Step 2. Switch off and unplug the system.
Step 3. Remove the cabinet cover on your computer to access the PCI
slots.
Caution: Ground yourself by touching a metal surface before
handling boards. Static charges on your body can damage
electronic components. Handle plug-in boards by the edge;
do not touch board components or gold connector contacts.
The use of a static ground strap is recommended.