Scsi led connector – LSI U80ALVD User Manual
Page 32
Advertising
2-14
Installing the LSIU80ALVD
Most PC cabinets are designed with a front panel LED. You may connect
the LED cable to connector J4 on the host adapter, as shown in
. This causes the front panel LED to light when there is activity
on the SCSI bus.
Connector J4 is not keyed. The orientation of the LED cable does not
matter as long as all four pins are connected.
Figure 2.8
SCSI LED Connector
Some LED cables have only two wires. In this case, place the connector
on one end or the other of J4. If the LED does not light during SCSI bus
activity from this host adapter, you may have to rotate the LED cable
connector 180
°
on J4.
LED
Connector
J4
Advertising