LSI U80ALVD - Manual (Page 33)

Detailed Installation Procedure 2-15
2.2.5 Making External SCSI Bus Connections
This section provides step-by-step instructions about making external
SCSI bus connections.
Step 1. To connect external SCSI devices to the LSIU80ALVD, plug the
68-pin HD connector on one end of a shielded external SCSI
cable (see
Figure 2.3 ) into the host adapter connector J3 (see
Figure 2.1 ).
This connector is in the bracket attached to the back panel of
your computer.
Figure 2.9 shows how this connection is made.
Figure 2.9 External Cable to Host Adapter
HD Connector