4 making internal scsi bus connections, Making internal scsi bus connections – LSI U80ALVD User Manual
Page 28
Advertising
2-10
Installing the LSIU80ALVD
2.2.4
Making Internal SCSI Bus Connections
This section provides step-by-step instructions about making internal
SCSI bus connections.
Step 1.
To connect an internal SCSI device, plug the 68-pin connector
on one end of the internal SCSI ribbon cable into connector J2
(see
Figure 2.4
Internal SCSI Ribbon Cable to Host Adapter
Connection
Internal
SCSI Interface
J2
Advertising