Life Fitness GS2 User Manual
Page 19
Advertising
S
TEP
17:
• Refer to cable ILLUSTRATION “A” on page 14 for cable routing while installing pulleys.
• Assemble one 3-1/2” PULLEY (24) between BASE PLATES (3) using one 3/8 X 3-3/4” BOLT (30),
two 3/8 X 1” SPACERS (43), one 3/8” LOCK NUT (34) and tighten securely.
• Loosely assemble one 3-1/2” PULLEY (24) between the PULLEY PLATES (12) using one
3/8 X 1-3/4” BOLT (27), and one 3/8” LOCK NUT (34).
• Secure end of LOW CABLE (21) using one 3/8 x 3-3/4” BOLT (30), one 3/8” FLAT WASHER (36)
and one 3/8” LOCK NUT (34) as shown in FIGURE 17
• Tighten both 3-1/2” PULLEYS (24) located on PULLEY PLATES (12)
19
34
24
30
27
43
3
12
3/8 X 3-3/4”
3/8 X 1-3/4”
36
3/8 X 3-3/4” 30
F
IGURE
17
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
Advertising