Life Fitness GS2 - Manual (Page 21)

26
17
58
57
53
49
19
51
25
S
TEP
19:
• If upon completion of assembly, the HEAD PLATE (19) does not sit on top of the first WEIGHT PLATE
(22), push the HEAD PLATE (19) down, insert the WEIGHT SELECTOR PIN (51) and perform several
repetitions at the press station. This will relax the cable system and prevent the HEAD PLATE (19) from
lifting up. See FIGURE 19
• If after completing previous step, the HEAD PLATE (19) still does not sit on top of the first WEIGHT PLATE
(22) or if there is excess slack in the cable system, adjust the threaded end of the LAT CABLE (20) and
ADJUSTABLE GLIDE (53) accordingly and retighten the jam nuts. See figure 19.
• For maximum performance, the HEAD PLATE (19) should just barely sit on the top WEIGHT PLATE (22).
• Attach the LAT BAR (17) to the ball end of LAT CABLE (20) using one SNAP LINK (57) as shown in
FIGURE 19.
• Attach the ANKLE STRAP (25) to the 12 LINK CHAIN (26) using one SNAP LINK (57) as shown in
FIGURE 19
T
HANK YOU FOR PURCHASING THE
L
IFE
F
ITNESS
GS2 G
YM
S
YSTEM
!
21
F
IGURE
19
ADJUSTMENT
ADJUSTMENT
TIGHTEN JAM
NUT SECURE-
PULL AND
TWIST TO
DISENGAGE