LG Option Type 1045 - Manual (Page 12)

Daft 2000/12/04
Getting Started
4
1
4. ISDN Line Connector (Option)
5. Parallel Interface Port
Plug the parallel cable into this port.
6. Network Interface Unit
Plug the network cable into this port.
7. Main Power Switch
Do not touch this switch. This switch
should be only used by a service repre-
sentative.
Note
❒ If the operation switch is on and there
is still no power, turn on the Main
Power switch.
❒ If you leave the Main Power switch
off for more than an hour, all files in
memory are lost.
⇒ Appendix, "When
Power is Turned off or Fails" in the
Advanced Features manual.
❒ The On indicator blinks in the follow-
ing cases:
• When the platen cover or docu-
ment feeder (ADF) is open.
• During communication with other
destination machines.
• When the hard disk is running.
8. Operation Switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
⇒ P.8 “Turning On the
Power”
9. Internal Tray 2
You can chose to have prints or copies de-
livered here.
Rear View
1. Bypass Tray
Select this tray for non-standard size pa-
per.
⇒ "Copying from the Bypass Tray" in the
Copy Reference.
⇒ Chapter 5, "Having Incoming Messag-
es Printed on Paper From the Bypass
Tray" in the Advanced Features manual.