LG Option Type 1045 - Manual (Page 27)

Daft 2000/12/04
Setting Originals
19
2
- - - -How to set A4, B4, A3, Lt, LG
and DLT size originals
Note
❒ When you set originals on the ADF
as shown in the above illustration,
the Stamp Name will be printed on
the receiver's printings as follow-
ing position:
• *1 On the upper end of printings
• *2 On the left end of printings
- - - -How to set A4, A5 and B5 size
originals
Limitation
❒ A5 size documents are not detect-
ed the exposure glass. Load A5
size documents in the ADF.
Note
❒ When you set originals on the ADF
as shown in the above illustration,
the Stamp Name will be printed on
the receiver's printings as follow-
ing position:
• *1 On the upper end of printings
• *2 On the left end of printings
Setting a Single Original on
the Exposure Glass
Set originals that cannot be placed in
the Document Feeder (ADF), such as
a book, on the exposure glass one
page at a time.
A
Lift the Document Feeder (ADF)
by at least 30 degrees. Place the
original face down and align its
upper left corner with the refer-
ence mark at the upper left corner
of the exposure glass.
1. Reference mark
2. Scale
Note
❒ If you do not raise the Docu-
ment Feeder (ADF) by at least
30 degrees, the original size will
not be detected.
Original
*1
*2
Where original is set
Exposure glass Document Feeder(ADF)
Original
*2
*1
Where original is set
Exposure glass Document Feeder(ADF)