Setting originals in the document feeder (adf) – LG Option Type 1045 User Manual

Page 28

Advertising
background image

Daft 2000/12/04

Faxing

20

2

B

Close the Document Feeder
(ADF).

Note

❒ When sending a bound original,

the received image may contain
some black areas. To reduce this
effect, hold down the original to
prevent its bound part from ris-
ing.

-

-

-

-Bound Original Page Order

W h en send in g bound o rig inals
(books, magazines, etc.), you can
choose to have either the left page or
right page sent first.

⇒ Chapter 4,

"Book Fax" in the Advanced Features
manual.

Note

❒ The default setting is Send Right

Page first.

⇒ Chapter 8, "Parame-

ter Setting" in the Advanced Fea-
tures manual.

Setting Originals in the
Document Feeder (ADF)

Use the Document Feeder (ADF) to
scan in a stack of originals in one op-
eration. The Document Feeder (ADF)
can handle both single-sided and
double-sided originals.

Limitation

❒ The maximum document length is

1200mm (47").

❒ Place all the originals to be sent in

a single stack.

❒ You cannot set originals in the

Document Feeder (ADF) one page
at a time or in sheaves.

❒ Do not open the Document Feeder

(ADF) while it is scanning the orig-
inals or a document could become
jammed.

Note

❒ If you send documents longer than

420mm (17"), select Long Docu-
ment mode with the User Parame-
ters. If a jam occurs, the document
might be damaged because scan-
ning will not stop.

⇒ P.21 “Setting

a Scan Area”

⇒ Chapter 8, " Param-

eter Setting" in the Advanced Fea-
tures manual.

❒ And also you must use memory

transmission because the docu-
ments longer than 420mm (17")
could not be sent by immediate
transmission.

❒ If an original jams, press the {Clear/

Stop}

key then remove the original

carefully.

❒ If your original is bent or folded,

flatten it before you set it.

❒ Set thin originals on the exposure

glass.

Reference

For information about the sizes
and number of originals that can
be placed in the Document Feeder
(ADF),

⇒ Chapter 9, "Acceptable

types of Originals" in the Ad-
vanced Features manual.

A

Adjust the document guide to
match the size of your originals.
Align the edges of your originals
and stack them in the Document
Feeder (ADF) face up.

Advertising