LG Option Type 1045 - Manual (Page 39)

Daft 2000/12/04
Canceling a Memory Transmission
31
2
Canceling a Memory Transmission
Canceling the Transmission
Before the Original is Scanned
A
Press the { { { {Clear Modes}}}} key.
Note
❒ When documents are loaded in
the Document Feeder (ADF),
you can cancel the transmission
by just removing them.
Canceling a Transmission
While the Original is Being
Scanned
Canceling a transmission after press-
ing the {Start} key.
A
Press the { { { {Clear/Stop}}}} key.
The machine will stop storing the
original and the data will not be
sent.
Canceling a Transmission
While the Message is Being
Sent
Use this procedure to cancel a trans-
mission after the original has been
scanned.
Limitation
❒ If transmission finishes while you
are carrying out this procedure, it
will not be canceled.
Note
❒ If you cancel a message while it is
being sent, transmission is halted
as soon as you finish this proce-
dure. However, some pages of
your message may have already
been sent and will be received at
the other end.
Canceling a transmission using the
[Change/Stop TX File] key
A
Press [Change/Stop TX File].
The list of programed files being
transmitted or a waiting transmis-
sion is displayed.