Printing on both sides of the paper (duplexing), Printing transparencies, Printing envelopes – Lexmark 2500 Series User Manual
Page 29
Printing on both sides of the paper (duplexing)
When you select Two-Sided Printing (duplexing), the printer prints on both sides of a sheet of paper. First, the printer
prints the odd-numbered pages of the document on the front sides of the paper. You then reload the document, and
the printer prints the even-numbered pages on the back sides of the paper.
1
With a document open, click File
Print.
2
Click Properties, Preferences, Options, or Setup.
3
From the “I Want To” menu, click Print on both sides of the paper.
4
Make sure Two-Sided Printing is selected.
5
Select a binding edge of Side Flip or Top Flip.
6
Make sure Print Instruction Page to Assist in Reloading is selected.
7
Click OK to close any printer software dialogs that are open.
8
Print the document.
Notes:
•
The instruction sheet for two-sided printing will not print completely on paper smaller than A4 or letter size.
•
To return to single-sided printing, make sure Two-Sided Printing is not selected.
Printing transparencies
1
Load up to 10 transparencies.
2
With your document open, click File
Print.
3
Click Properties, Preferences, Options, or Setup.
4
From the Quality/Copies tab, select Normal or Photo.
5
From the Paper Type section, select Transparency.
6
Click OK to close any printer software dialog boxes that are open.
7
Print the document.
Note: Do not force the transparencies into the printer.
Printing envelopes
1
Load envelopes.
2
From the software application, click File
Print.
3
Click Properties, Preferences, Options, or Setup.
4
From the “I Want To” menu, select Print on an envelope.
5
From the Envelope Size list, select the envelope size loaded.
6
Select Portrait or Landscape orientation.
29