Liebert Distribution Monitoring LDM - Manual (Page 28)

Operation
24
5.5.6 Select Panel to View
Up to two panelboards may be connected to the Liebert LDM (see 4.1.1 - Connecting Panelboards
A and B). Each may be viewed in the Configuration main window.
To switch the view to a different panel:
• In the Select Panel box, click on Panel A for Panelboard A or Panel B for Panelboard B. The
panel name appears in the Panel Name box, as in the following examples.
5.5.7 Select Breakers to View
For each panelboard, two types of breakers may be configured.
To switch the view, click on a button in the Select View box (shown above):
• Panel Breakers to view circuit breakers installed in the panelboard (see example above left).
• Auxiliary Breakers to view breakers installed outside the panelboard—for example, subfeed
breakers (see example above right).
Select Panel
Select View
Panel Breakers view Auxiliary Breakers view