Liebert Distribution Monitoring LDM - Manual (Page 36)

Operation
32
9. The Upgrade Firmware window appears. Click the Download button to continue.
10. Wait for the firmware upgrade to complete.
• The program erases the old image, than writes the new image, as shown below.
11. When the new image is loaded, the Flash program restarts the unit. Verify the following:
• In the Summary Status box, the Number of Units should be 0 under Failed.
• In the Detail Status box, Running should appear under Progress—this indicates that the
BCB has been restarted successfully.
12. Click Exit to close the Flash program.
Progress
Progress
Failed = 0