Linksys iPhone CIT400 - Manual (Page 12)

Dual-Mode Internet Telephony Kit
4 Chapter 2: Getting to Know the Dual-Mode Internet Telephony Kit
The Base Station
The Base Station
The base station must be connected to an ethernet port to use Skype. To make landline calls, the base station
should also be connected to a telephone line port.
Front Panel
Skype LED Blue. The Skype LED lights up and is solidly lit during a Skype call.
PHONE LINE LED Amber. The PHONE LINE LED lights up and is solidly lit during a landline call.
Page Button Press this button to page your handset. To stop the page, press the right soft key on your
handset. You will also use this button if you need to register additional handsets (refer to
“Chapter 4: Using the Dual-Mode Internet Telephony Kit” for more information).
Back Panel
Line Port Use the Line port to connect the base station to your telephone wall jack with a RJ-11
telephone cable.
Ethernet Port Use the Ethernet port to connect the base station to your ethernet connection with an RJ-
45 ethernet cable.
Power Port Use the power port to connect the power adapter of the base station.
Reset Button To reset all network settings to the factory default settings, use the end of a paper clip to
push in the reset button.
Figure 2-2: Front Panel of Base
Station
Page
Button
Figure 2-3: Side Panel of
Base Station