Linksys iPhone CIT400 - Manual (Page 95)

Dual-Mode Internet Telephony Kit
87 Appendix C: Regulatory Information
Compliance Information
Compliance Information
US and Canada Compliance Information
This equipment has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC rules and ICES-003 of Industry
Canada. Operation is subject to the following conditions: (1) This device may not cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation.
This product has been certified in accordance with 47 Code of Federal Regulations per the requirements as set forth in Part 15D for Unlicensed PCS devices.
This device has been certified in accordance with Industry Canada RSP-100 per the technical requirements as referenced in RSS-213.
FCC Part 68 Statement
This equipment complies with Part 68 of the FCC Rules. A label is attached to the equipment that contains, among other information, its FCC registration
number and ringer equivalence number. If requested, this information must be provided to the telephone company.
This equipment uses the following USOC Jack: RJ-11.
An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or
premises wiring using a compatible modular jack, which is FCC Part 68 compliant. Connection to the telephone network should be made by using the
standard modular telephone jack.
The REN is useful to determine the quantity of devices that may be connected to the telephone line and still have all of those devices ring when your
telephone number is called. In most, but not all areas, the sum of RENs should not exceed 5. To be certain of the number of devices that may be connected
to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.